ABB rec670 User Manual

Section 4 Understand the local human-machine
interface
About this chapter
This chapter describes the display, its keys (buttons) and LEDs that make up the
HMI. How the keys are used to navigate the HMI, how to interpret the graphic
information on the LCD and, what the LEDs indicate is explained in the sections
that follow.
4.1
Overview
The human machine interface is used to monitor and to some extent control the
way the IED operates. The configuration designer can add functions that alert to
events requiring the attention of the operator.
IEC08000098 V1 EN
Figure 1: 1/2 x 19” case with small LCD
1MRK 511 188-UEN C Section 4
Understand the local human-machine interface
19
Operator's manual

ABB rec670 Specifications

General

Brand	ABB
Model	rec670
Category	Control Unit
Language	English