Displays setting parameters for operating mode of memory function.
9.3.11.8 LogicTimerSet
Main menu/Settings/Setting Group N/Logic/LogicTimerSet/TS
Displays settable parameters for operation (On or Off) and delay for settable timer.
9.3.11.9 LogicTimerSet_qt
Main menu/Settings/Setting Group N/Logic/LogicTimerSet_qt/TS
Displays settable parameters for operation (On or Off) and delay for settable timer.
9.4 Activate setting group
Main menu/Settings/Activate setting group
Available setting groups can be configured in PCM600. Under activate setting
group one of these setting groups can be chosen for the application at hand.
9.5 Language
Under the language part of the main menu the language options available in the
HMI are located. These vary depending on the configuration ordered.
1MRK 511 188-UEN C Section 9
Read and change settings
63
Operator's manual
To Next Page
Loading...
Need help?
General
