ABB rec670 User Manual

11.5.10 Monitoring
Main menu/Test/Function test modes/Monitoring
Test of monitoring functions such as event counter and disturbance report.
11.5.11
Logic
Main menu/Test/Function test modes/Logic
Test of trip logic and event counter functions.
11.6 Function status
11.6.1 Overview
In the Function status section of the Test menu, data useful to the user in Test mode
can be found. The information available here is not limited to test applications
alone and provides information about the system as a whole.
11.6.2 Differential protection
11.6.2.1 High impedance differential protection HZPDIF
Main menu/Test/Function status/Differential protection/
HighImpDifferential(PDIF,87)/HZD
Displays available instances of HZPDIF with some measurements per instance.
These are the trip signal, the alarm signal and the measured RMS voltage on the
secondary side of the CT.
11.6.3 Current protection
Viewable data under Current protection consists mainly of trip status data under the
various categories of current protection which include overcurrent protection,
thermal overload, stub protection, pole discordance and variations of these.
11.6.3.1 Breaker failure protection CCRBRF
Main menu/Test/Function status/Current protection/BreakerFailure(RBRF,
50BF)/BFP
Displays an application dependent number of instances of CCRBRF with some
measurements per instance. The measurement outputs include trip status and faulty
circuit breaker alarm.
1MRK 511 188-UEN C Section 11
Test the IED
71
Operator's manual

ABB rec670 Specifications

General

Brand	ABB
Model	rec670
Category	Control Unit
Language	English