ABB rec670 User Manual

11.6.9.4 IEC61850 generic communication I/O functions DPGGIO
Main menu/Test/Function status/Control/DoubelPointIndication(DPGGIO)/
DP
Displays the output data of the DPGGIO function.
11.6.9.5
Synchrocheck and energizing check SESRSYN
Main menu/Test/Function status/Control/Synchronizing(RSYN,25)/SYN
Displays available instances of SESRSYN with a number of measurements per
instance. These include information about which lines and buses selected, various
voltage and frequency differences and feedback on synchronization status.
11.6.9.6 Tap changer control and supervision TCMYLTC/TCLYLTC
Main menu/Test/Function status/Control/TransformerTapControl(YLTC,84)/
TCM
Main menuTestFunction statusControlTransformerTapControl(YLTC,
84)TCL
Displays data about available instances of tap changer parameters such as tap
positions for low and high voltage and type of code conversion.
11.6.9.7 Automatic voltage control for tapchanger, single and parallel control
TR1ATCC/TR8ATCC
Settings/Test/Function status/Control/TransformerVoltageControl(ATCC,90)/
VCS
Settings/Test/Function status/Control/TransformerVoltageControl(ATCC,90)/
VCS
Displays parameters for current and voltage levels, deadbands, timers and alarm
levels.
11.6.10 Monitoring
Monitoring includes large amounts of viewable data including Disturbance report
data, Service values, Current phasors, Voltage phasors, Milliampere signal level
supervision, Fault locator, Binary signal status report, Events, MVGGIO,
MVExpander and LEDs.
11.6.10.1 Logical signal status report BINSTATREP
Main menu/Test/Function status/Monitoring/BinarySignalStatusReport/SSR
Section 11 1MRK 511 188-UEN C
Test the IED
82
Operator's manual

ABB rec670 Specifications

General

Brand	ABB
Model	rec670
Category	Control Unit
Language	English