4.1.13 Clearing and acknowledging
The Clear button is used to reset, acknowledge or clear all messages and indications,
including LEDs and latched outputs as well as registers and recordings. Press the
Clear button to activate a selection menu, where you can choose which clearance or
reset function you want to make. Events and alarms assigned to alarm LEDs are
cleared with the Clear button as well.
1.
Press
to activate the Clear view.
A070860 V2 EN
Figure 20: Clear view
2.
Select the item to be cleared with or .
3.
Press , change the value with or and press again.
The item is now cleared.
4. Repeat steps 2 and 3 to clear other items.
Use the
button as a shortcut for clearing. The first three-second
press clears the indications. The second three-second press clears the
alarm LEDs. If new indications have appeared between the first and
the second press, they are cleared first.
4.1.14 Using LHMI help
1.
Press to open the help view.
2.
Scroll the text with or if the help text exceeds the display area.
3.
To close the help, press .
Section 4 1MRS756708 A
Using HMI locally or via web interface
40 615 series
Operation Manual
To Next Page
Loading...
Need help?
General
