ABB REF615 User Manual

4.2 Using WHMI
WHMI is disabled by default. You must be logged in and authorized to use the WHMI.
1. To enable the WHMI, select Main menu/Configuration/HMI/Web HMI
mode via the LHMI.
2. Reboot the IED for the change to take effect.
4.2.1 Logging in
1. Enter the username with capital letters.
2. Enter the password.
3. Click Log in.
A070923 V2 EN
Figure 21: Entering username and password to use the WHMI
4.2.2 Logging out
The user is logged out after session timeout. The timeout can be set in Main menu/
Configuration/HMI/Web HMI timeout.
• To log out manually, click Logout on the menu bar.
1MRS756708 A Section 4
Using HMI locally or via web interface
615 series 41
Operation Manual

ABB REF615 Specifications

General

Brand	ABB
Model	REF615
Category	Protection Device
Language	English