Only authorized and skilled personnel should analyze the errors and
decide on further actions.
The IED records:
• IED status data
• Events
• System registrations
Document all the recorded data from the IED before you reset the
tripping and IED lockout functions.
5.3 IED parametrization
IED parameters are set with a parameter setting tool, or via the LHMI or WHMI.
Setting parameters need to be calculated according to the electrical network
conditions and the electrical characteristics of the protected equipment. The IED's
settings need to be verified before the IED is connected to a system.
Document all changes to parameter settings.
For more information, see PCM600 documentation.
5.3.1 IED settings for IED functionality
Function settings can be edited one by one by navigating to the individual setting
values, for example via the LHMI. The values in other setting groups should be known
before editing a certain setting value.
After completing the editing of setting group values, the new values are activated.
The user can either commit the edited values or discard them. Setting values can also
be copied from one setting group to another.
1MRS756708 A Section 5
IED operation
615 series 65
Operation Manual
To Next Page
Loading...
Need help?
General
