ABB REF615 User Manual

Committing values will take a few seconds.
If you only write values to the IED and then reboot, the old values
will resume in the IED as active values and the new values are lost.
4.2.8 Clearing and acknowledging
Reset, acknowledge or clear all messages and indications, including LEDs and latched
outputs as well as registers and recordings, in the Clear menu.
1. Click the Clear menu.
A070935 V3 EN
Figure 33: Selecting clear menu
2. In the New Value box, click True to select the item to be cleared.
3. Click Write to IED.
4. Click Reject.
Section 4 1MRS756708 A
Using HMI locally or via web interface
50 615 series
Operation Manual

ABB REF615 Specifications

General

Brand	ABB
Model	REF615
Category	Protection Device
Language	English