2105552MNAE | RMC-100 | 97
5.7 Verify the applications
To verify that the purchased applications are instantiated:
1. Click the station ID name at the top of the navigation tree. The Station Setup tab displays.
2. Click Application/License Management to display the Application/License Management tab.
3. Verify that the application names display on the Type list.
4. Click Add App to add missing applications, as necessary. The Add New Application dialog
displays (Figure 5-33
).
Figure 5-33: Applications list
5. Click Application to Add and select the application from the drop-down list. Then click OK.
6. Click Send to save the application.
5.8 Enable RMC for MQTT support
MQTT supports connection of the RMC-100 to a service provider or private cloud. It may require
authentication certificates for the device. Consult with your IT administrator for configuration options
or requirements when using certificates.
– Cybersecurity risk. The RMC-100 is not an internet-facing device. Do not
connect directly to the Internet. An MQTT gateway is r
equired between the Digital Oilfield
and the RMC. If the customer’s corporate network firewall is compromised, the RMC
-100
would be at risk without the MQTT gateway.
Enable MQTT and the REST (MQTT configuration interface):
1. On the PCCU Entry mode navigation tree, select Communications>Services (Figure 5-34
).
To Next Page
Loading...
Need help?
General
