Allen-Bradley PanelView Plus 1000 User Manual

1 Publication 2711P-UM001A-EN-P
Chapter 5
Installing and Replacing Components
Chapter Objectives
This chapter shows how to install, replace or upgrade various
components of the PanelView Plus terminal, including:
• Logic Module
• RAM and Internal Compact Flash
• Communication Module
• Display Module
• Battery
• Display Module Bezel
• Backlight
• AC Power Supply
• Product Label
• Keypad Legend Inserts
• External Compact Flash Card
Required Tools
Tools required to install or replace the various components of the
PanelView Plus terminal are:
• #1 and #2 Phillips screwdriver
• Electrostatic (ESD) wristband
Precautions
Before installing or replacing any components, disconnect power
from the PanelView Plus terminal. During installation, take care not to
touch any of the exposed electronic components.
ATTENTION
!
Disconnect all power from the PanelView Plus
terminal before installing or replacing any
components. Failure to disconnect power may result
in electrical shock and/or damage to the terminal.
ATTENTION
!
Work in a static free environment and wear a
properly grounded ESD wristband.
Be careful when touching any of the exposed
electronic components to prevent damage from
electrostatic discharge (ESD).
AB PLCs

Allen-Bradley PanelView Plus 1000 Specifications

General

Brand	Allen-Bradley
Model	PanelView Plus 1000
Category	Touch terminals
Language	English