Allen-Bradley SLC 500 BASIC User Manual

Publication 1746-UM004A-US-P
Programming Overview 4-3
Figure 4.2 SLC 5/02 to Module M0 and M1 File Transfer
Module ID Codes
Table 4.3 lists the ID codes needed to configure the memory of your SLC 500 fixed
or modular controller.
BASIC Programming
Instructions
BASIC programs are composed of BASIC programming instructions grouped
together. These instructions are a combination of BASIC commands, statements,
operators, and system subroutines (CALLs).
Word 0
Word 1
.
.
.
Word 62
Word 63
Word 100
Word 101
.
.
.
Word 162
Word 163
CPU M0 File
BASIC or
BASIC-T
Module Input
Buffer
Word 0
Word 1
.
.
.
Word 62
Word 63
Word 100
Word 101
.
.
.
Word 162
Word 163
CPU M1 File
BASIC or
BASIC-T
Module Output
Buffer
Table 4.3 Module ID Codes
Controller
Module ID Code
1746-BAS 1746-BAS-T
SLC 500, 5/01 3506 3523 (Class 1)
SLC 5/02 and higher 13106 13123 (Class 4)
IMPORTANT
The module operates in two modes: the Command mode (Direct
mode) and the Run mode (Interpreter mode). You can only enter
commands when the processor is in the Command mode.
Spare Allen-Bradley Parts

Allen-Bradley SLC 500 BASIC Specifications

General

Brand	Allen-Bradley
Model	SLC 500 BASIC
Category	Control Unit
Language	English