Setup and Configuration
47
Tango Series Audio Controllers
Backlight - Intensity
Select Intensity to access the Backlight Intensity options screen (FIG. 49), where you can set the
intensity of the Controller’s LCD screen:
To change the backlight intensity, select the option (i.e. 25%, 50%, 75% or Full), the backlight will dim
to the selected value.
When you return to the Backlight Intensity options screen, the selected intensity setting will
appear in brackets.
To exit the screen, select Quit.
Backlight - Mode
Select Mode to access the Backlight Mode options screen (FIG. 50):
To change the backlight Mode, select the option (i.e. Auto On, Always On, or Always Off).
Auto On (default): The backlight will remain on when accessing and using the Setup/
Programming Menus from the front of the Controller. 30 seconds after exiting the Menus, the
backlight will turn off.
Always On: backlight remains on at all times
Always Off: backlight remains off at all times, even when accessing the Setup/Programming
Menus.
When you return to this screen, the option chosen will appear in brackets.
To exit the screen, select Quit.
FIG. 49 Backlight Intensity options screen
FIG. 50 Backlight Mode options screen
Return to the previous screen
Select an intensity setting
Return to the previous screen
Select an mode setting
To Next Page
Loading...
Need help?
General
