4-12 Chapter 4: BIOS setup
PIO Mode [Auto]
Selects the PIO mode. Conguration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Conguration options: [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology. Conguration
options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer.
Conguration options: [Disabled] [Enabled]
IDE Conguration [Enhanced]
Set the IDE Conguration.
Conguration options: [Disabled] [Compatible] [Enhanced]
Configure SATA as [IDE]
Set the SATA conguration. Conguration options: [IDE] [RAID] [AHCI]
4.3.5 IDE Conguration
The items in this menu allow you to set or change the congurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
congure the item.
IDEConguration
ATA/IDEConguration [Enhanced]
CongureSATAas [IDE]
HardDiskWriteProtect [Disabled]
IDEDetectTimeOut(Sec) [35]
ATA(PI)80PinCableDetection[Host]
Select Screen
Select Item
+- Change Option
F1 General Help
F10SaveandExit
ESCExit
BIOS SETUP UTILITY
Main
v02.58(C)Copyright1985-2007,AmericanMegatrends,Inc.
Options
Disable
Compatible
Enabled