3-6
Chapter 3: BIOS setup
Chapter 3
3.3 Main menu
The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup
program. The Main menu provides you an overview of the basic system information, and
allows you to set the system date, time, language, and security settings.
Security
The Security menu items allow you to change the system security settings.
• If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC)
RAM to clear the BIOS password. See section 1.2.5 Jumpers for information on how
to erase the RTC RAM.
• The
Administrator or User Password items on top of the screen show the default
Not Installed. After you set a password, these items show Installed.
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
EFI BIOS Utility - Advanced Mode
Choose the system default language
BIOS Information
BIOS Version 0206 x64
Build Date 06/20/2012
ME Version 8.0.0.1296
South Bridge Stepping C1
CPU Information
Genuine Intel(R) CPU 0 @ 2.90GHz
Speed 2900 MHz
Memory Information
Total Memory 1024 MB (DDR3)
Memory Frequency 1333 MHz
System Language English
System Date [Fri 11/08/2011]
System Time [16:46:15]
Access Level Administrator
> Security
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
To clear the administrator password,
key in the current password in the
Enter Current Password box,
and then press <Enter> when
prompted to create/conrm the
password.
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights
The password must be 3 to 20 characters long.
Administrator Password Not Installed
User Password Not Installed
Administrator Password
User Password
Back Main\
Security >
EFI BIOS Utility - Advanced Mode
To Next Page
Loading...
Need help?
General
