Read from DIFF
Reads table only from the difference seen in calibration.
• When in tagged mode, only loads data into tagged cells.
Read from COMPARE
Reads table only from the compare file calibration.
• When in tagged mode, only loads data into tagged cells.
Import from clipboard (CSV) format
Reads data in from "Export to Clipboard (CSV) format".
This allows you to copy between tables from different screens.
• When in tagged mode, only loads data into tagged cells.
• Can import files from other ECU software programs if they have an
export function to CSV format. Copy the CSV file into the clipboard
then can import (See format). If not then manually edit the file until it
fits the format.
Format
------
Expects import data to be the following format.
Line
----
1. (Header)
2. (X items)(Comma)
3. (Y items)(Comma)
4. (0)(Comma)(X axis X item)(Comma)
5. (Y axis data)(Comma)(Data)(Comma)
6. Rest of table rows
Print
Prints page.
Export to clipboard
Sends page data to the clipboard. In a format that’s easy to past into e-
mails etc.
Export to clipboard (CSV) format
Sends page data to the clipboard in CSV format.
Makes it easy to import into a spread sheet program.
Used also when want to copy tables between windows. Export it into
clipboard and then "Import from clipboard (CSV) format" into the table.
Attribute
Attributes are used in AUTOTUNE but can be used to show sites you have edited or do
not want changed.
To Next Page
Loading...
Need help?
General