Decel enlenment mult
Deceleration enleanment multiplier.
Do not change these values until the fuel and ignition tables are fully mapped.
Making changes before all fuel sites are tuned can cause confusing tuning problems.
Ign adv attack rate
Ignition advance attack rate (Degrees/second)
Sets the maximum rate at which the ignition timing is allowed to advance. Can be used to
improve driveability and/or reduce exhaust emissions. Calibration range 6.2 to 1593.8
deg/sec.
Ign adv decay rate
Ignition advance decay rate (Degrees/second).
Set the maximum rate at which the ignition timing is allowed to
retard. Can be used in conjunction with above to improve driveability and/or reduce
exhaust emissions. Calibration range 6.2 to 1593.8.
Decel TPS dashpot
Deceleration throttle dashpot calibration. The amount of delay before idle control valve
returns the engine speed back to idle speed.
Ign time const
Ignition acceleration and deceleration time constant.
Ign mod 4 comp
Ignition acceleration and deceleration compensation.
Ign mod 4 min clamp
Ignition acceleration and deceleration retard clamp.
Ign mod 4 max clamp
Ignition acceleration and deceleration advance clamp.
Fuel time const
Fuel acceleration and deceleration time constant.
Fuel accel mult
Fuel acceleration and deceleration multiplier.
Fuel decal clamp
Fuel deceleration clamp.
Fuel accel clamp
Fuel acceleration clamp.
To Next Page
Loading...
Need help?
General