Barco DP2K-C Series User Manual

47R5905752 /16 DP2K C
Required tools
• 17 mm open ended wrench.
• Torque wrench with 17 mm hexagon socket
• Torque wrench with 5 mm Allen socket.
Required parts
• Lamp cathode adapter.
• Hexagon socket head screw M6 x 40.
• Flat washer.
How to install the xenon lamp into the lamp house
1. Remove the UV blocker and side cover of the lamp house by releasing the retaining thumbscrews as
illustrated.
Note: In case of a lamp replacement, the UV blocker will be already removed.
Image 4–13 Remove UV blocker and side cover
2. Install the lamp cathode adaptor (reference 1) upon the xenon lamp (reference 3) as illustrated. Tighten
the adapter fixation screw (reference 2) with a torque of 2,5 Nm (1.84 lbf*ft). Use for that a torque wrench
with a 5 mm Allen socket. Make sure that there is full contact between the cathode adapter and the lamp
base.
Note: Do not take the lamp out of its protective container or protective cloth while mounting the
adapter.
2,5 Nm
2
1
3
Image 4–14 Mount cathode adaptor
Lamp & Lamp House

Barco DP2K-C Series Specifications

General

Brand	Barco
Model	DP2K-C Series
Category	Projector
Language	English