BMW S 1000R 2018 User Manual

5 without Dynamic Damp-
ing Control (DDC)
OE
Adjusting rebound-stage
damping at rear wheel
( 75).
6 Spare fuses with puller tool
Miniature fuses 4 A, 7.5 A
and 10 A
Puller tool for removing
fuses
Spare fuses
7 Plastic top part
with Dynamic Damping
Control (DDC)
OE
Adjust spring preload on
front wheel ( 70).
8 Torx wrench, T25
Remove and install trim
panel components.
Remove rider's seat
( 63).
Front wheel stand
Mounting front-wheel
stand
ATTENTION
Use of the BMW Motorrad
front wheel stand without an
additional center or auxiliary
stand
Component damage cause by
tipping over
Place the motorcycle on the
center stand or an auxiliary
stand before lifting it with the
BMW Motorrad front wheel
stand.
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends the BMW Motorrad
rear wheel stand.
Mounting rear-wheel stand
( 134).
For a description of the correct
installation, please refer to the
instructions for the front-wheel
stand.
BMW Motorrad offers a suit-
able auxiliary stand for each
motorcycle. Your authorized
BMW Motorrad retailer will
be very happy to assist you in
choosing the suitable auxiliary
stand.
9
133
z Maintenance

BMW S 1000R 2018 Specifications

General

Torque	114 Nm at 9, 250 rpm
ABS	Standard
Traction Control	Standard
Power	165 hp (121 kW) at 11, 000 rpm
Transmission	6-speed constant mesh
Rear Suspension	Aluminum swing arm, adjustable compression and rebound damping
Front Brake	Dual 320mm discs, 4-piston calipers
Rear Brake	Single disc brake, diameter 220 mm, single-piston floating caliper
Seat Height	814 mm
Fuel Capacity	17.5 liters
Weight	205 kg (wet weight)
Front Suspension	Upside-down telescopic fork, adjustable compression and rebound damping