BMW S 1000R 2018 User Manual

Open cap 1 of expansion tank.
Add coolant up to specified
level.
Checking coolant level
( 141).
Close cap of expansion tank.
Installing right-hand fairing side
panel ( 159).
Tires
Checking tire pressure
WARNING
Incorrect tire inflation pres-
sure
Poorer handling characteristic
of motorcycle, reduction of tire
service life
Ensure proper tire inflation
pressure.
WARNING
Valve inserts open of their
own accord at high speeds
Sudden loss of tire inflation pres-
sure
Use valve caps with rubber
sealing ring and screw on
firmly.
Park motorcycle, ensuring that
support surface is firm and
level.
Check tire pressures against
data below.
Tire pressure, front
36.3 psi (2.5 bar) (with tire
cold)
Tire pressure, rear
42.1 psi (2.9 bar) (with tire
cold)
If tire pressure is too low:
Correct tire pressure.
Wheel rims and tires
Checking rims
Park motorcycle, ensuring that
support surface is firm and
level.
Subject wheel rims to visual
inspection for defects.
Have damaged rims checked
and, if necessary, replaced
by a specialist service facil-
ity, preferably an authorized
BMW Motorrad retailer.
9
142
z Maintenance

BMW S 1000R 2018 Specifications

General

Torque	114 Nm at 9, 250 rpm
ABS	Standard
Traction Control	Standard
Power	165 hp (121 kW) at 11, 000 rpm
Transmission	6-speed constant mesh
Rear Suspension	Aluminum swing arm, adjustable compression and rebound damping
Front Brake	Dual 320mm discs, 4-piston calipers
Rear Brake	Single disc brake, diameter 220 mm, single-piston floating caliper
Seat Height	814 mm
Fuel Capacity	17.5 liters
Weight	205 kg (wet weight)
Front Suspension	Upside-down telescopic fork, adjustable compression and rebound damping