Exercise caution when using
high-pressure or steam-jet
devices.
Cleaning sensitive
motorcycle parts
Plastics
ATTENTION
Use of unsuitable cleaning
agents
Damage to plastic surfaces
Do not use abrasive cleaners or
cleaners containing alcohol or
solvents.
Do not use insect sponges or
sponges with a hard surface.
NOTICE
When used as intended, sooner
or later irreversible soiling of the
seat covers will occur. In partic-
ular, this can be caused by non-
colorfast clothing.
Fairings and panels
Clean trim panel components
with water and BMW Motorrad
solvent cleaner.
Windshields and lenses are
manufactured in plastic
Clean off dirt and insects with a
soft sponge and plenty of water.
NOTICE
Soften stubborn dirt and dead
insects by covering the affected
areas with a wet cloth.
Chrome
Carefully clean chrome parts
with plenty of water and
BMW Motorrad Care Products
motorcycle cleaner. This is
particularly important in the case
of road salt.
Use BMW Motorrad metal polish
for additional treatment.
Radiator
Clean the radiator regularly to
prevent overheating of the en-
gine due to inadequate cooling.
For example, use a garden hose
with low water pressure.
ATTENTION
Bending of radiator fins
Damage to radiator fins
When cleaning, ensure that the
cooler fins are not bent.
Rubber
Treat rubber components with
water or BMW rubber protection
coating agent.
ATTENTION
Use of silicone sprays for
care of rubber seals
Damage to rubber seals
Do not use silicone sprays
or care products that contain
silicone.
11
173
z
Care
To Next Page
Loading...
Need help?
General
