Charging battery
Disconnecting battery from
motorcycle ( 163).
Charge battery using a suitable
charger.
Comply with operating instruc-
tions of charger.
Once battery is fully charged,
disconnect charger's terminal
clips from battery terminals.
NOTICE
In the case of longer periods
when the motorcycle is not be-
ing used, the battery must be
recharged regularly. See the
instructions for caring for your
battery. Always fully recharge
the battery before returning it to
use.
Connecting battery to vehicle
( 163).
Removing battery
Remove rider's seat ( 63).
Disconnecting battery from
motorcycle ( 163).
Lift battery up and out, using
tilting movements if it is difficult
to move.
Install battery
NOTICE
If the vehicle has been discon-
nected from the battery for a
long time, the current date must
be entered in the instrument
cluster to make sure the service
display is working properly.
Place battery in battery com-
partment, positive terminal on
right in direction of travel.
Place battery in battery com-
partment, minus terminal on
left in direction of travel.
Connecting battery to vehicle
( 163).
Installing rider's seat ( 64).
Setting the clock ( 51).
Fuses
Removing fuse
ATTENTION
Bypassing defective fuses
Risk of short circuit and fire
Do not bypass defective fuses.
Replace defective fuses with
new fuses.
Turn off ignition.
Park motorcycle, ensuring that
support surface is firm and
level.
Remove passenger seat
( 62).
9
164
z
Maintenance
To Next Page
Loading...
Need help?
General
