Video Recorder 630/650 Series Quick install | en 17
Bosch Security Systems Installation and Operation manual F.01U.169.663 | v2.0 | 2012.02
3.2 First-time use
The Quick install menu opens the first time the unit is used. Fill in the basic settings in the
three tabs to get the unit operational. The unit begins recording automatically when the Quick
install menu is closed.
To open the Quick install menu at any other time:
1. Press the menu key to bring up the System Control Bar.
2. Press the menu key again to enter the main menu.
– The main menu appears on monitor A.
3. Select System, then the Configuration submenu, and finally Quick install.
Navigating
Use the supplied USB mouse. Alternatively, use the following front panel keys:
– Use the enter key to select a submenu or item.
– Use the arrow keys to move through a menu or list.
– Use the exit key to go back or to switch off the menu.
After bootup, the unit presents the log in screen over a quad display. The default User ID is
ADMINISTRATOR, the default password is 000000 (six zeros).
3.2.1 Restoring defaults
To restore the unit to its factory default:
1. Remove power from the DVR.
2. Press and hold the OSD key on the front panel.
3. Supply power to the unit.
– The factory defaults are restored.
To Next Page
Loading...
Need help?
General