44 en | Operating instructions Video Recorder 630/650 Series
F.01U.169.663 | v2.0 | 2012.02 Installation and Operation manual Bosch Security Systems
5.7.3 Smart search
1. From a Date/Time search, press the exit key to select the Search Tabs.
2. Press the left/right arrow keys to select Smart Search.
3. Press the enter key to activate the search.
– With the mouse, click the Smart Search tab to make it active.
Search criteria
–Under Channel, specify the camera input to search for. The selected input will be shown.
–Under Start and End, fill in date and time values to determine the time span of the
search.
–Set Sensitivity to determine the threshold for detecting change in the video.
–Set Area to limit the smart search to only the area effected.
– Select Search to start the search.
Search results
– The recording fitting the filter and closest to the selected date and time is shown first.
– If more events than can be shown on the page are found, use Page to see more
results.
Figure 5.8 Search menu - Smart search options
– Use the up/down arrow keys to move through the list.
– Press the Play button for a full-screen playback of the selected recording.
Smart Search results
The smart search results are indicated by a start and stop time of a small period of video.
Within this period of video the smart search results can be found.
To Next Page
Loading...
Need help?
General