3 608 870 A47 Tightening Technology | Bosch Rexroth AG 25/263
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-05
2.6 Product-related safety instructions for the Nexo cordless Wi-Fi
nutrunner by Rexroth
In this chapter, general safety instructions are listed that relate to the technology used in the product.
2.6.1 General product-dependent instructions
• The warranty only applies to the delivered configuration.
• The warranty will not apply if the product is incorrectly assembled or handled or not used as intended.
Use and handling of
the electric tool
CAUTION
Improper handling!
Damage to persons and property
Keep the electric tool away from rain or moisture. Water penetrating into the electric tool will
increase the risk of electric shocks.
Secure the workpiece. A workpiece that is held by clamping devices or a vise is held more safely
than if its held by hand.
Hold the electric tool firmly and do not clamp it in a vise When tightening and loosening screws,
high reaction torques may occur for short periods of time.
Do not expose the electric tool to inadmissible mechanical loads under any circumstances. Never
use the electric tool as a lever or hammer. Do not place any objects on it.
Prior to performing any work on the electric tool (e.g., maintenance, tool replacement, etc.) and
during transport and storage of the tool, put the program selector to its center position. You
might be injured if you unintentionally operate the on/off switch.
Only operate the electric tool with closed interface cover.
To Next Page
Loading...
Need help?
General
