208/263 Bosch Rexroth AG | Tightening Technology 3 608 870 A47
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-
9.8.4 Data
Settings Data
Use this menu item to manage and transfer data of the Nexo cordless Wi-Fi nutrunner: This menu features
additional menu items:
• Result storage (page 208)
• Standard Nexo (page 209)
• Open Protocol (page 217)
•IPM (page 218)
• VW-XML (page 221)
9.8.4.1 Result storage
Settings Data Results storage
Use this menu item to define the storage location and the settings for saving the measurement results.
Further information on data output can be found in chapter Data services (see page 85).
As of Nexo firmware version 1100, the Mode menu item is used to set up the ID code to identify a set of
results data (see page 184).
As of Nexo firmware version 1100, the results are stored in the internal memory of the nutrunner. In addi-
tion, the results can be stored in the *.json format on the
Micro SD card inserted into the nutrunner.
Table 9–56: Result storage tab
Element Description
Max. results Selects a maximum number of results to be saved. The storage comprises up
to 5,000 results with actual value and graph.
Use ring buffer Defines whether a ring memory is to be used for the results: The oldest result
will be overwritten with the most recent one if the maximum number of tight-
ening jobs is exceeded.
If the ring memory is not selected, result storage will stop once the maximum
number of tightening jobs for which results are saved has been reached. The
result storage must first be deleted to reactivate storage after such a stop.
Remove result storage All saved results are deleted.
Save Click Save to save the edited data.
Discard Click Discard to discard the edited data.
To Next Page
Loading...
Need help?
General
