Brother BAS-415 User Manual

[Z] Attaching Y wire
Ywire(L)
1) Push the carriage 0 to the back and secure it.
2) Use the bolt 0 to attach (Y) wire L@ end (the end furthest from the ball) to hook (L Y)@.
3) Put the wire onto pulleys 0 and(!). Then, put the wire ball into the hole of wire drum (Y) 6.
Wind the wire four times, put it around pulley~, then attach it to stand (RL)@) with the bolt(!).
Ywire(R)
1) Pull the carriage 0 forward and secure it.
2) Use the bolt@) to attach (Y) wireR ID end (the end closest to the ball) to stand (RR) 0.
3) Put the wire on to pulley 4). Then, put the wire ball into the hole of wire drum (Y) @.
Wind the wire four times, put it around pulleys@ and CD, then, attach it to hook (RY) @ with the bolt @.
-45-
From the library of: Superior Sewing Machine & Supply LLC

Brother BAS-415 Specifications

General

Brand	Brother
Model	BAS-415
Category	PDA
Language	English