MAKING COPIES
11 - 6
Changing Default Copy Settings
Press Menu/Set, 3 to change default settings for Copy mode. These settings
will remain until you change them again by pressing Menu/Set. Adjust the
Contrast and Quality settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press
to scroll through the options for each setting. Press Menu/Set
to save your selection. Press Stop/Exit—OR—Press
to select the next
setting you want to change.
Press Menu/Set, and 3.
Copy Mode (Type of Original)
You can select the Copy resolution for your type of original. The default setting
is AUTO, which is used for originals that contain both text and photographs.
TEXT is used for originals containing only text. PHOTO is used for copying
photographs.
1
Press Menu/Set, 3, 1.
2
Press to choose the type of original (AUTO, TEXT or PHOTO), and then
press Menu/Set.
3
Press Stop/Exit.
Copy Contrast
You can adjust the copy contrast to make copies darker or lighter.
1
Press Menu/Set, 3, 2.
2
Press to make a copy lighter
—OR—Press
to make a copy darker,
and then press Menu/Set.
3
Press Stop/Exit.
or
TEXT
1.COPY MODE
2.CONTRAST
- +
is default
AUTO
PHOTO
1.COPY MODE
or
2.CONTRAST
To Next Page
Loading...
Need help?
General
