AUTO DIAL NUMBERS AND DIALING OPTIONS
7 - 8
Pause
Press Redial/Pause to insert a 3.5 second pause between numbers. If you are
dialing overseas, you can press Redial/Pause as many times as needed to
increase the length of the pause.
Hold
1
Press Hold to place a call on Hold.
2
You can replace the handset without disconnecting the call.
3
Pick up the FAX/MFC handset. (Picking up an extension handset will not
release the call from Hold.)
Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause to
try again. Anytime you want to make a second call to the last number dialed,
press Redial/Pause to save time.
If you’re sending a fax automatically and the line is busy, the FAX/MFC will
automatically redial (up to three times at 5 minute intervals).
Tone/Pulse (For Canada Only)
If you have pulse dialing service, but need to send tone signals (for example, for
telephone banking), follow the directions below. If you have touch tone service,
you do not need this feature to send tone signals.
1
Lift the handset.
2
Press #. Any digits dialed after this send tone signals.
3
When you hang up, the FAX/MFC returns to pulse dialing service.
To Next Page
Loading...
Need help?
General
