INITIAL SETUP
4 - 6
WARNING
It is important that you do NOT choose PERMANENT unless ALL the
users are hearing-impaired. Otherwise, the default setting of AMPLIFY may
damage the hearing of some users.
Setting Volume Amplify
Please carefully read Choosing the Handset Volume on page 4-5 before you do
the following steps:
1
Press Menu/Set, 1, 4, 5.
2
If none of the users are hearing-impaired,
press
to select VOL AMPLIFY:OFF?, and then press Menu/Set and go
to Step 4—OR—
If some or all of the users are hearing-impaired, select VOL AMPLIFY:ON?,
and then press Menu/Set.
3
If all the users are hearing-impaired,
press
to select PERMANENT?,
and then press Menu/Set—OR—
If only some of the users are hearing-impaired,
select TEMPORARY?, and then press
Menu/Set.
4
Press Stop/Exit.
Memory Storage
In the event of a power failure, all settings in the GENERAL SETUP, SETUP
RECEIVE, SET AUTO DIAL, REMOTE FAX OPT, plus the COVERPG
SETUP and COVERPAGE MSG functions (from SETUP SEND) are stored
permanently. You may have to reset the date and time.
5.VOLUME AMPLIFY
VOL AMPLIFY:ON?
or
PERMANENT?
TEMPORARY?
or
To Next Page
Loading...
Need help?
General
