ON-SCREEN PROGRAMMING
3 - 1
3
3
On-Screen Programming
User-Friendly Programming
We have designed your FAX/MFC with on-screen programming using
navigation keys. User-friendly programming helps you take full advantage of all
the menu selections your FAX/MFC has to offer.
Since your programming is done on the LCD, we created step-by-step on-screen
prompts to help you program your FAX/MFC. All you need to do is follow the
prompts as they guide you through the menu selections and programming
options. Additionally, you can program settings more quickly by pressing
Menu/Set and the menu number using the dial pad.
Menu Selection Table
You can probably perform most of these programming operations without the
Owner’s Manual. To help you understand the menu selections and options that
are found in the FAX/MFC programs, use the Menu Selection Table on
page 3-3.
You can program your FAX/MFC by pressing Menu/Set followed by the menu
numbers. For example: to set FAX RESOLUTION to FINE, press
Menu/Set, 2, 2, 2 and to select FINE, and then press Menu/Set.
Alternating Displays
Sometimes, the LCD alternates between the active setting and a Help message
giving brief instructions about how to proceed. The message you’ll probably
see most often is shown below. When you place an original in the ADF, the
message appears to tell you that you can dial a number and send a fax, or you
can make a copy.
or
FAX: NO. & START
COPY: NO. & COPY
To Next Page
Loading...
Need help?
General
