Brother FAX-2800 User Manual

6 - 7 SETUP SEND
Cover Page For Next Fax Only
Make sure the Station ID is set up (see page 4-2). This feature does not work
without the Station ID.
You can set the fax to send a cover page with a particular document. This cover
page will include the number of pages in your document.
1 Place the original face down in the ADF.
2 Press Menu/Set, 2, 2, 8.
3 When LCD shows NEXT FAX ONLY?,
press Menu/Set.
4 Press to select ON (or OFF), and then press Menu/Set.
5 Press to select one of the standard or custom comments, and then press
Menu/Set.
6 Enter two digits to indicate the number of pages you are sending, and then press
Menu/Set. (For example, press 0, 2 for 2.)
(Enter 0 0 to leave the number of pages blank. If you make a mistake, press
to back up and re-enter the number of pages.)
7 Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings.
8 Enter the fax number you’re calling.
9 Press Fax Start.
Always Send Cover Page
Make sure the Station ID is set up (see page 4-2). This feature does not work
without the Station ID.
You can set the FAX/MFC to send a cover page whenever you send a fax. The
number of pages in your fax is not included when you use this setting.
1 Press Menu/Set, 2, 2, 8.
2 Press to select COVERPAGE:ON?, and then press Menu/Set.
3 If you selected ON, press to select one of the standard or custom
comments, and then press Menu/Set.
4 Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 to exit if you are finished choosing settings.
8.COVERPG SETUP
or
or
8.COVERPG SETUP
or
or

Brother FAX-2800 Specifications

General

Brand	Brother
Model	FAX-2800
Category	Fax Machine
Language	English