USING BROTHER MACHINE AS A PRINTER
12 - 2
Two-Sided Printing (Manual Duplex)
The supplied printer drivers for Windows
®
95/98/98SE/Me and Windows NT
®
Workstation Version 4.0 support manual duplex printing. (For more
information, see the Help screen for the printer driver.)
Please select LPT1 port in the printer driver. The MFC prints all the
even-numbered pages on one side of the paper first. Then, the Windows
®
driver
instructs you (with a pop-up message) to reinsert the paper. Before reinserting
the paper, straighten it well or you may get a paper jam. Very thin or very thick
paper is not recommended. If the paper “double-feeds” (sends two sheets at
once), hold the stack of paper except for the front sheet while the paper is
feeding.
When you use manual duplexing, it is possible that a paper jam may occur or the
printer quality might not be satisfactory.