Brother FAX-2800 User Manual

vii
Quick Reference Guide
Sending Faxes
Automatic Transmission
1 Place the original face down in the
ADF.
2 Enter the fax number using One
Touch (For FAX-2800 Only),
Speed Dial, Search or the dial pad.
3 Press Fax Start .
Sending a Cover Page
1 Place the original face down in the
ADF.
2 Press Menu/Set , 2 , 2 , 8 .
3 When NEXT FAX ONLY?
appears, press
Menu/Set .
4 Press to select ON (or OFF ),
and then press
Menu/Set .
5 Press to select a comment, and
then press
Menu/Set .
6 Enter two digits to indicate the
number of pages being sent, and
then press
Menu/Set .
7 Press 1 to select additional settings
—
OR —Press 2 if you are ready to
fax.
8 Enter the fax number.
9 Press Fax Start .
Real Time Transmission
You can send faxes in real time.
1 Place the original face down in the
ADF.
2 Press Menu/Set , 2 , 2 , 6 .
3 Press to select ON, and then
press Menu/Set—OR—
For the next transmission only,
press to select NEXT FAX
ONLY, and then press Menu/Set.
4 For the next fax only, press to
select ON, and then press Menu/
Set.
5 Press 1 to select additional settings
—OR—Press 2 to fax.
6 Enter the fax number.
7 Press Fax Start.
Receiving Faxes
Select Receive Mode
Press Receive Mode to select
FAX ONLY , FAX/TEL,
TAD:ANSWER MACH.
or
MANUAL . If you select
FAX/TEL , make sure to set Ring
Delay and F/T Ring Time.
Manual Reception
1 Pick up the handset.
2 Press Fax Start if you hear fax
tones (beeps).
3 When the LCD shows
RECEIVING, replace the handset.
or
or
or
or
or
QUICK REFERENCE GUIDE

Brother FAX-2800 Specifications

General

Brand	Brother
Model	FAX-2800
Category	Fax Machine
Language	English