4 - 1
INITIAL SETUP
4
4
Initial Setup
Getting Started
Setting Paper Size
You can use three sizes of paper for printing your faxes and copies — letter,
legal and A4. When you change the kind of paper you have loaded in the
FAX/MFC, you will need to change the setting for paper size so your FAX/MFC
can fit the incoming fax on the page.
1
Press Menu/Set, 1,1.
2
Press to select LETTER, LEGAL
or A4, and then press Menu/Set.
3
Press Stop/Exit.
Setting Date and Time
Your FAX/MFC displays the date and time and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time. All other
settings remain unaffected.
1
Press Menu/Set, 1, 2.
2
Enter the last two digits of the year,
and then press Menu/Set.
3
Enter two digits for the month (for
example, enter 09 for September, or 10
for October), and then press Menu/Set.
4
Enter two digits for the day (for example,
06), and then press Menu/Set.
5
Enter the time in 24-hour format
(for example, enter 15:25 for 3:25 PM),
and then press Menu/Set.
6
Press Stop/Exit.
The LCD now shows the date and time.
1.PAPER SIZE
or
2.DATE/TIME
YEAR:XX
MONTH:XX
DAY:XX
TIME:XX:XX
To Next Page
Loading...
Need help?
General
