Brother FAX-2800 User Manual

4 - 5 INITIAL SETUP
Setting the Handset Volume
1 Press Menu/Set, 1, 4, 4.
2 Press to select HIGH (or LOW ), and then press Menu/Set.
3 Press Stop/Exit.
—OR—
You can adjust the handset volume any time you are talking on the telephone.
There are two handset volume levels, LOW and HIGH. The default setting is
LOW.
Press to adjust the volume level. The LCD shows the setting you are
choosing. The new setting will remain until you change it again.
Choosing the Handset Volume (For Volume Amplify)
Before you begin to use the machine, you must decide if you need to set the
handset volume to VOL AMPLIFY: ON for a user who is hearing-impaired.
The AMPLIFY volume level complies with FCC standards.
VOLUME AMPLIFY: OFF
This default setting is appropriate if none of the users are hearing-impaired.
During a conversation, users can press Volume on the control panel to
adjust the volume to LOW or HIGH. When the handset is replaced, the handset
volume will remain until you change it again.
VOLUME AMPLIFY: ON—TEMPORARY
This setting is appropriate if some of the users are hearing-impaired. During a
conversation, users can press Volume
on the control panel to adjust the
volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the
handset volume returns to the default setting of LOW.
VOLUME AMPLIFY:ON—PERMANENT
Choose VOL AMPLIFY:ON — PERMANENT if all of the users are
hearing-impaired. During a conversation, users can press Volume
on the
control panel to adjust the volume to
LOW , HIGH or AMPLIFY . When the
handset is replaced, the handset volume returns to the default setting of
AMPLIFY .
When you press Volume on the control panel to adjust the volume, the
LCD shows the setting you are choosing. Each key press changes the volume
to the next setting.
4.HANDSET
or
or
or
or
or
or

Brother FAX-2800 Specifications

General

Brand	Brother
Model	FAX-2800
Category	Fax Machine
Language	English