5-45
Confidential
1.3.23 Configure for country/region and model (Function code 74)
<Function>
This function is used to customize the machine according to language, function settings, and
worker switch settings.
<Operating Procedure>
(1) Press the [7], and then the [4] in the initial state of maintenance mode. For models
without keypad, press the [▲] or [▼] to display “MAINTENANCE 74” on the LCD and
press the [OK]. The spec code currently set is displayed on the LCD.
(2) Enter the spec code (four digits) you want to set.
For models without keypad, the first digit starts flashing. Press the [▲] to enter “1”, or
[▼] to enter “0” to select the number for the first digit and press the [OK]. The second
digit starts flashing. Select the number by repeating the procedure above. The second
digit is completed and the fourth digit starts flashing. Press the [▲] or [▼] to display
numbers for the third and fourth digit on the LCD, then press the [OK].
(3) Press the [Start] or [Mono Start] to save the new setting, and “PARAMETER INIT” is
displayed on the LCD. The machine then returns to the initial state of maintenance
mode.
Setting by spec code list
Note:
If there is no entry for one minute or longer, the machine returns to the initial state of
maintenance mode automatically, regardless of the display status.
MODEL Country Code Country Code (Detail)
DCP-7090 China 0020 - -
DCP-7095D China 0120 - -
DCP-7190DN China 0020 - -
DCP-7195DW China 0220 - -
DCP-B7500D China 0220 - -
India 0245 - -
DCP-B7520DW Brazil 0242 - -
CEE-General 1250 Bulgaria 1250
Croatia 1250
Czech 1250
Czech 0204
Hungary 1250
Poland 1250
Romania 1250
Slovakia 1250
Slovenia 1250
Others 1250
China 0620 - -
DCP-B7530DN China 0120 - -
DCP-B7535DW Brazil 0742 - -
China 0720 - -
India 0745 - -
Indonesia 0729 India 0745
Mexico 0746 - -
Vietnam/Indonesia 0729 - -
To Next Page
Loading...
Need help?
General
