1-28
Confidential
2.8 Print Speeds with Various Settings
(CCD model)
Print speed is up to 30 ppm for A4 size and 32ppm for Letter size when loading A4 or Letter
size paper from the paper tray in the plain paper mode.
Actual print speed varies depending on the media type or paper size as shown in the tables
below;
<A4/Letter size>
<Smaller size than A4 or Letter>
Specifications are subject to change without notice.
Media type setting
Print speed
(for all models)
Plain paper, Recycled paper A4: 30 ppm
Letter: 32 ppm
Plain paper thin A4: 30 ppm
Letter: 32 ppm
Thick paper, Envelope, Envelope thin, Label A4: 15 ppm
Letter: 16 ppm
Thicker paper, Bond paper, Envelope thick 3 ppm
Media type setting
Print speed
(for all models)
Plain paper, Recycled paper 0 to 90 second 32 ppm,
90 second or later 15 ppm
Plain paper thin A4: 30 ppm
Letter: 32 ppm
Thick paper, Envelopes, Envelopes thin,
Label, HAGAKI
0 to 9 second 16 ppm,
9 second or later 15 ppm
Thicker paper, Bond paper, Envelopes thick 3 ppm
Note :
• The print speed may vary according to conditions, such as paper size and paper
tray.
• When a smaller size paper than A4 or Letter is printed, the temperature on both
edges of the fuser unit is much higher than the temperature on the center of the unit
where the paper is fed depending on the setting or model. Therefore, the print
speed is slowed in order to decrease the temperature on the edges after the
specified time, it is maximum print speed when you first start printing.
• The actual print speed varies depending on the paper size.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
