Brother PR-620 - Chapter 3: OTHER BASIC PROCEDURES; Resuming Operation After Power Loss; Changing the Needle; Using Embroidery Frames Correctly

1 GETTING READY
After unpacking the machine, first refer to “Included Accessories” on page 4, and
check that all listed accessories are included. After checking that all accessories are
included, the embroidery machine can be set up.
The setup of the machine and the various preparations required before starting to sew
are described in this chapter.
Names of Machine Parts and Their Functions ...........................................................2
Front view / 2 Right-side/rear view / 3
Operation panel / 3
Included Accessories.................................................................................................4
Accessories / 4
Optional Accessories.................................................................................................5
Setting Up the Machine.............................................................................................6
Setup and transporting precautions / 6 Setup location / 7
Setting up the machine / 8 Adjusting the operation panel position / 9
Preparing the thread guide assembly / 10 Positioning the spool stand / 11
Attaching the embroidery frame holder / 11