56
Flash Control from the Camera’s Menu Screen
You can set Custom Functions for the Speedlite from the camera’s
menu screen. The details displayed vary by the camera. If C.Fn-20 to
23 are not displayed, set them by operating the Speedlite. For the
Custom Functions, see pages 113-117.
1
Select [Flash C.Fn settings].
Select [Flash C.Fn settings] or
[External flash C.Fn setting].
X The flash Custom Function settings
screen is displayed.
2
Set the Custom Function.
Select the Custom Function number,
then set the function.
To clear all the Custom Function
settings, select ([Clear settings],)
[Clear all Speedlite C.Fn’s] or [Clear
ext. flash C.Fn set.] in step 1.
Flash Custom Function Settings
Custom Function number
When using a camera released in 2011 or earlier, or with EOS REBEL
T6/1300D or EOS REBEL T5/1200D, the C.Fn-20 to 23 settings are not
cleared even if [Clear all Speedlite C.Fn’s] or [Clear ext. flash C.Fn
set.] is selected. When the procedure described in “Clearing All the
Custom/Personal Functions” on page 112 is performed, all the Custom
Functions (except C.Fn-00) are cleared.
When using the flash with EOS DIGITAL cameras released in and after
2012, as auto external metering and manual external metering can be
directly selected with the flash’s <E
> button, C.Fn-05-2, 3 are not
selectable (except with EOS REBEL T6/1300D and EOS REBEL T5/1200D).
Personal Functions (P.Fn/p.118) cannot be set or all cleared at once from
the camera’s menu screen. Set them by operating the Speedlite.
To Next Page
Loading...
Need help?
General
