55
Flash Control from the Camera’s Menu Screen
Zoom (flash coverage)
You can set the Speedlite flash coverage. When [Auto] is selected,
the flash coverage is set automatically according to the focal length
of the shooting lens and the image sensor size of the camera (p.26).
Wireless flash functions
You can set radio transmission wireless flash photography and
optical transmission wireless flash photography. For details, see
Chapter 4 (p.57) and Chapter 5 (p.89).
Clear settings
When [Clear flash settings] or [Clear external flash set.] is
selected, you can revert the settings of Speedlite to their default
settings.
[Flash firing] and [E-TTL II flash metering] are displayed in step 2 or
step 3 on page 52. (Display layouts and procedures vary by camera
model.)
When [Flash sync. speed in Av mode] is not displayed, it can be set
with the camera’s Custom Functions.
When the flash exposure compensation is set on the flash, flash
exposure compensation cannot be performed from the camera. If both
are set at the same time, priority is given to the setting on the flash.
When the flash’s Custom Function C.Fn-05 is set to [1:TTL] (p.114),
[TTL] can be selected when [Flash mode] is set. When performing
autoflash photography with an EOS DIGITAL camera, set C.Fn-05 to
[0:E-TTL II/E-TTL].
If the flash coverage is automatically set such as when the bounce
adapter is attached or the wide panel is used, setting [Zoom] (flash
coverage) is not possible.
To Next Page
Loading...
Need help?
General
