Preparations
28
Inserting and Removing a Memory Card
Make sure to initialize all memory cards
before using them with this camcorder
( 29).
1 Turn off the camcorder.
2 Open the LCD panel.
3 Slide toward the right
to open the memory card slot
cover.
4 Insert the memory card straight,
with the label facing up, all the
way into the memory card slot
until it clicks.
5 Close the memory card slot cover.
• Pull the cover down until it clicks.
• Do not force the cover closed if the
memory card is not correctly
inserted.
1 Slide toward the right
to open the memory card slot
cover.
2 Push the memory card once to
release it. When the memory card
springs out, pull it all the way out.
3 Close the memory card slot cover.
IMPORTANT
Memory cards have front and back sides
that are not interchangeable. Inserting a
memory card facing the wrong direction
can cause a malfunction of the camcorder.
Selecting the Memory for the
Recordings
You can select to record your movies
and still images in the built-in memory
or on the memory card. The built-in
memory is the default media for
recording both.
FUNC.
( 24)
[ MENU]
[ MEMORY OPER.]
[MEDIA:MOVIES]*
The memory you want to use
* Select [MEDIA:IMAGES] to change the
media to be used for recording still images.
TO REMOVE THE MEMORY CARD
CARD OPEN
CARD OPEN
( 22)
TO CHANGE THE MEDIA FOR RECORDING
MOVIES
FUNC.
FUNC.
D128_PAL_E.book Page 28 Thursday, March 6, 2008 7:53 PM
To Next Page
Loading...
Need help?
General
