Video
48
NOTES
• When you apply a fader, not only the
picture but also the sound will fade in or
out. When you apply an effect, the
sound will be recorded normally.
• The camcorder retains the last setting
used even if you turn off the digital
effects or change the recording
program.
On-Screen Displays and Data Code
With every scene or still image
recorded, the camcorder keeps a data
code that includes the date, time and
information about the camera setup at
the time of recording. While viewing a
still image, all the data is displayed in
the form of information icons. During
movie playback you can select what to
display with the [DATA CODE] setting
( 90). You can also turn most on-
screen displays on or off.
Repeatedly press to turn the
on-screen displays on/off in the
following sequence:
, mode:
• All displays on
• Most displays off*
mode:
• All displays on
• Data code only
• All displays off
mode:
• All displays on
• Regular displays only (removes the
histogram and information icons)
• All displays off
* The following icons will appear even when
all other on-screen displays are turned off:
The icons and (in mode), the
icon and AF frames when the autofocus
is locked (in mode), screen markers
(both recording modes).
Audio Recording Level
You can adjust the audio recording level
for the built-in or for an external
microphone. You can display the audio
level indicator while recording.
Manual Adjustment of the Audio
Recording Level
1 If the joystick guide does not
appear on screen, press to
display it.
If [ MIC] does not appear on the
joystick guide, repeatedly push the
joystick ( ) toward [NEXT] to display
it.
DISP.
( 22)
D128_PAL_E.book Page 48 Thursday, March 6, 2008 7:53 PM
To Next Page
Loading...
Need help?
General
