Canon imageRUNNER 2202 User Manual

14 Main Power and Energy Saver Key
Main Power and Energy Saver Key
This section describes how to use the main power switch and the Energy Saver key.
How to Turn ON the Main Power
This section explains how to turn ON the main power.
IMPORTANT
If you want to turn OFF the main power and then back
ON again, wait for at least 10 seconds before turning
ON the main power.
01 Make sure that the power plug is rmly
inserted into the power outlet.
WARNING
Do not connect or disconnect the power cord with
wet hands, as this may result in electrical shock.
02 Press the main power switch located on
the right side of the machine to the "I" side.
NOTE
• The response of the buttons and keys may not be
optimal immediately after you turn ON the main
power of the machine.
• If you are using Department ID Management, see
e-Manual > Basic Operations.
Energy Saver Key
You can press [ ] (Energy Saver) to make the machine
enter the Sleep mode and reduce power consumption.
If the machine is idle for a certain period of time, the
machine will enter the Auto Sleep mode to minimize
energy consumption.
Press [
] (Energy Saver) to cancel the Sleep mode and
resume normal machine operations.
NOTE
The machine can print documents from a personal
computer when it is in the Sleep mode.
Downloaded from ManualsPrinter.com Manuals

Canon imageRUNNER 2202 Specifications

General

Functions	Print, Copy, Scan
Print Speed	22 ppm
Print Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Paper Output	100 sheets
Duplex Printing	Manual
Copy Speed	22 cpm
Copy Resolution	600 x 600 dpi
Multiple Copy	Up to 99 copies
Zoom	50-200%
Interface	USB 2.0
Type	Laser
Memory	128 MB
Paper Input (Standard)	250-sheet cassette
Paper Sizes	A4, A5, B5, Legal, Letter
Scan Resolution	600 x 600 dpi
Power Consumption	Approx. 1.2 kW
Operating System Compatibility	Windows
Warm-up Time	13 Seconds