Canon imageRUNNER 2202 User Manual

33
English
Operating the Machine from a Computer (Remote UI)
Operating the Machine from a Computer (Remote UI)
The Remote UI (User Interface) is preinstalled software in the machine that enables you to access the
machine's functions by using your computer's Web browser. For example, the Remote UI enables you to
access the machine to check job status, execute jobs, and specify various settings. For more details, see
e-Manual > Remote UI.
NOTE
• To log in as the administrator using the Remote UI, you must specify the network connection settings in advance. For
instructions on specifying the network connection settings, see e-Manual > Before You Start Using This Machine.
• For information on necessary system environment and preparation to start the Remote UI, see e-Manual > Remote
UI.
01 Start the Web browser on your
computer.
02 Enter 'http://<IP address or host name
of the machine>' in [Address].
03 Enter the System Manager ID and
System Manager PIN → click [Log In].
You are now logged in to the machine as an
administrator.
To login as a end user, click [End-User Mode].
If a login service such as Department ID Management
has been set, enter the appropriate login information.
04 Check the job status and specify the
settings.
■ To check the job status:
• Click [Status Monitor/Cancel].
■ To specify the settings:
• Click [Settings/Registration].
Downloaded from ManualsPrinter.com Manuals

Canon imageRUNNER 2202 Specifications

General

Functions	Print, Copy, Scan
Print Speed	22 ppm
Print Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Paper Output	100 sheets
Duplex Printing	Manual
Copy Speed	22 cpm
Copy Resolution	600 x 600 dpi
Multiple Copy	Up to 99 copies
Zoom	50-200%
Interface	USB 2.0
Type	Laser
Memory	128 MB
Paper Input (Standard)	250-sheet cassette
Paper Sizes	A4, A5, B5, Legal, Letter
Scan Resolution	600 x 600 dpi
Power Consumption	Approx. 1.2 kW
Operating System Compatibility	Windows
Warm-up Time	13 Seconds