imageRUNNER ADVANCE C5500 and C5500 II Series Customer Expectations Document
Version 6 imageRUNNER ADVANCE C5500 and C5500 II Series Customer Expectations Document Page 68
7.4.6 2.5 inch/250 GB HDD-N1
Required to use the Mirroring function of the HDD Mirroring Kit.
NOTE
• The 2.5 inch/250 GB HDD-N1 does not increase the overall storage capacity of
the machine.
• If the machine has the standard 2.5 inch/250 GB HDD, an additional optional
2.5 inch/250 GB HDD-N1 is required to encrypt and back up the data using the
HDD Mirroring Kit.
• If the standard 2.5 inch/250 GB HDD has been replaced with the optional 2.5
inch/1 TB HDD-P1, an additional optional 2.5 inch/1 TB HDD-P1 is required to
encrypt and back up the data using the HDD Mirroring Kit.
7.4.7 2.5 inch/1 TB HDD-P1
Replace the machine’s standard 250 GB hard disk drive with the 2.5 inch/1 TB
HDD-P1 to increase the HDD capacity.
NOTE
If the machine is configured with an optional 2.5 inch/1 TB HDD-P1, an
additional optional 2.5 inch/1 TB HDD-P1 is required to encrypt and back up the
data using the HDD Mirroring Kit.
7.4.8 Connection Kit-A1 for Bluetooth LE
• Enables the user to connect their mobile devices to the machine via Bluetooth.
• The machine’s Bluetooth setting and the Bluetooth setting on the user’s mobile
device must be enabled.
7.4.9 NFC Kit-C1
• Enables the user to connect their Android mobile devices to the machine via
NFC (Near Field Communications).
• The Canon PRINT Business app must be installed and started on the user’s
Android device, and the “Use NFC Card Emulation” setting on the machine
must be enabled.
To Next Page
Loading...
Need help?
General
