Canon iR3225 Guide

3
Basic Copying and Mail Box Features
3-40 Page Order (Staple)
Page Order (Staple)
Remark
The Staple mode can be set only if an optional finisher
is attached.
When printing on special types of paper, such as
heavy paper or transparencies, be sure to correctly set
the paper type, especially if you are using heavy
paper. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the
fixing unit may become dirty, or the paper could jam,
and a service repair may be needed.
1. Place your originals → press [Finishing].
If Auto Collate in Copy Settings (from the Additional Functions screen) is set to 'On', the Collate or Offset
Collate mode is automatically set when you place your originals in the feeder. (See "Auto Collate(p.8-14).")
2. Press [Staple].
If you want to make hole punches, press [Hole Punch].
●
If the optional Finisher-S1 is attached:
●
If the optional Finisher-AE1 is attached:
●
If the optional Saddle Finisher-AE2 is attached:
Acesst 1.0 6251194

Canon iR3225 Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Monthly Duty Cycle	50, 000 pages
Paper Output	250 Sheets
Duplex Printing	Yes
Print Speed	25 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	25 cpm
Scan Resolution	600 x 600 dpi
Paper Capacity	550 sheets
Connectivity	USB, Ethernet
Warm-up Time	Less than 30 seconds
Paper Input (Standard)	550 sheets
Media Sizes	A4, A5, B5, Legal, Letter, Executive
Zoom	25-400%
Functions	Print, Copy, Scan
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac