EasyManuals Logo

Canon iR3225 Guide

Canon iR3225
634 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #394 background imageLoading...
Page #394 background image
4
Special Copying and Mail Box Features
4-140 Job Build
Job Build
This mode enables you to scan originals that are too many to be placed at once, by dividing them into
multiple batches. You can use both the feeder and the platen glass for scanning. The originals are
stored as one document after all of the batches have been scanned.
Remark
The 2-Sided Original mode is available only if the
optional Feeder (DADF-U1) is attached (standard
equipped for the iR3245N/iR3235N/iR3225N).
For information on the modes which cannot be set in
combination with this mode, see "Combination of
Functions Chart(p.9-8)."
You cannot change the scan settings while the
machine is scanning originals in the Job Build mode.
You need to set the necessary scan settings
beforehand, according to the type of originals or the
desired result.
If you place your originals in the feeder, remove the
originals from the original output area when the
scanning of each batch is complete.
You can change or specify the following settings
before scanning the next batch of originals (i.e.,
between batches): the 2-sided Original mode, original
type, scan exposure, and colour mode. However, you
cannot change the original type, scan exposure, and
colour mode, while the machine is scanning originals in
the Image Combination mode.
If you place different size originals in the feeder, set
the Different Size Originals mode. (See "Different Size
Originals(p.4-139).")
It is useful to store originals in an inbox first, and print
them later using the Merge Documents mode if you
cannot prepare the originals at one time, or if you want
to specify different settings for each original. (See
"Merging Documents(p.3-103).")
If you want to scan one-sided and two-sided originals
and store them as two-sided documents, divide the
originals into one-sided and two-sided batches. For
example, if the first batch consists of two-sided
originals, set the 2-sided Original mode. Thereafter,
you have to manually set or cancel the 2-sided Original
mode for each batch of originals that you scan.
Acesst 1.0 6251194

Table of Contents

Other manuals for Canon iR3225

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon iR3225 and is the answer not in the manual?

Canon iR3225 Specifications

General IconGeneral
Print TechnologyLaser
Copy Resolution600 x 600 dpi
Monthly Duty Cycle50, 000 pages
Paper Output250 Sheets
Duplex PrintingYes
Print Speed25 ppm
Print Resolution1200 x 1200 dpi
Copy Speed25 cpm
Scan Resolution600 x 600 dpi
Paper Capacity550 sheets
ConnectivityUSB, Ethernet
Warm-up TimeLess than 30 seconds
Paper Input (Standard)550 sheets
Media SizesA4, A5, B5, Legal, Letter, Executive
Zoom25-400%
FunctionsPrint, Copy, Scan
Network ConnectivityEthernet
Operating System CompatibilityWindows, Mac

Related product manuals