Canon iR3225 Guide

7
Using the Express Copy Basic Features Screen
Enlarging/Reducing Originals with Copy Ratios Set Independently for the X and Y Axes (XY
Zoom)
7-19
Enlarging/Reducing Originals with Copy Ratios Set
Independently for the X and Y Axes (XY Zoom)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Setting the X
and Y Axes Independently(p.3-24)."
Remark
You cannot enlarge/reduce highly transparent
originals, such as transparencies, in the Auto XY Zoom
mode. To make such copies, specify the copy ratio.
If you set the Auto XY Zoom mode, select the paper
size using the Manual Paper Selection mode. If you do
not select a paper size, Paper Drawer 1 is
automatically selected and the copy ratio is set to
match the size of the paper loaded in that drawer.
If you set the copy ratio in the Auto XY Zoom mode,
Auto Orientation is not performed.
1. Press [Other Ratio Settings] → [XY Zoom].
2. Press [X] (horizontal axis) or [Y] (vertical axis) → enter a value.
Press [Auto XY Zoom] to set the copy ratios automatically.
Acesst 1.0 6251194

Canon iR3225 Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Monthly Duty Cycle	50, 000 pages
Paper Output	250 Sheets
Duplex Printing	Yes
Print Speed	25 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	25 cpm
Scan Resolution	600 x 600 dpi
Paper Capacity	550 sheets
Connectivity	USB, Ethernet
Warm-up Time	Less than 30 seconds
Paper Input (Standard)	550 sheets
Media Sizes	A4, A5, B5, Legal, Letter, Executive
Zoom	25-400%
Functions	Print, Copy, Scan
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac