Canon iR3225 Guide

1
Introduction to the Copy Functions
1-48 Interrupt Mode
Interrupt Mode
This mode enables you to interrupt the current job or a reserved job to make priority copies.
This mode is useful if you need to make a rush copy during a long copy job.
Remark
For information on the modes which cannot be set in
combination with this mode, see "Combination of
Functions Chart(p.9-2)."
You can make interrupt copies whenever the machine
is ready to scan.
To cancel the Interrupt mode, press [Interrupt].
To cancel previously set copy modes, press . (The
Interrupt mode itself is not cancelled.)
1. Press [Interrupt].
If you want to make copies after changing the Department ID while Department ID
Management is enabled, press → enter the Department ID and password using -
. (See the Reference Guide.)
The current job does not stop printing immediately after you press [Interrupt]. Printing of the current job
stops only when the actual printing of the priority or interrupt copy starts.
Acesst 1.0 6251194

Canon iR3225 Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Monthly Duty Cycle	50, 000 pages
Paper Output	250 Sheets
Duplex Printing	Yes
Print Speed	25 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	25 cpm
Scan Resolution	600 x 600 dpi
Paper Capacity	550 sheets
Connectivity	USB, Ethernet
Warm-up Time	Less than 30 seconds
Paper Input (Standard)	550 sheets
Media Sizes	A4, A5, B5, Legal, Letter, Executive
Zoom	25-400%
Functions	Print, Copy, Scan
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac