4
Special Copying and Mail Box Features
4-110 Cover/Job Separator
Cover/Job Separator
If you select multiple documents and set the Merge Documents mode, you can specify the Cover/Job
Separator mode. The Cover/Job Separator mode automatically adds front and back covers, or job
separator sheets to divide each document, using a different type of paper from that used for the main
document.
Remark
For information on the modes which cannot be set in
combination with this mode, see "Combination of
Functions Chart(p.9-8)."
You can set the Cover/Job Separator mode only if you
select multiple documents and set the Merge Documents
mode. (See "Merging Documents(p.3-103).")
You cannot print on the job separator sheets.
If you select the Staple mode when an optional finisher
is attached, you cannot staple more than 30 sheets of
A3 or A4R paper, or 50 sheets of A4 paper, including
sheet insertions.
Job separator sheets are not counted as prints.
Front Cover/Back Cover
This setting adds a front cover or back cover sheet to each set of prints. You may also print on the
front cover or back cover sheet.
Job Separator
This setting inserts a sheet of paper between documents. You cannot print on the job separator
sheets.
Acesst 1.0 6251194